Bought a rail but need a good gas block? Like fiddling around with
your gas hole? Look no further! Weighing in at 1.7oz, this .875 gas
block is fully adjustable via a screw in the front and lockable via a
screw in the side. This block is attached to your barrel by compression
which is attained by tightening the three screws on the bottom. It is
suggested that a REMOVABLE thread locker of your choice be used on the
screws.
Features
-Gas port witness hole for effortless gas port alignment.
-Gas tube removal hole for gas tube removal.
Quick Spec Sheet
-316 Stainless
-1.7oz
-for .875 barrel size
Allen Keys Needed For This Block:
Adjustment screw = 5/64"
Side locking screw = .05"
Attachment screws= 3/32"
Each gas block comes with a roll pin so there is no need to hunt one down at your local store!
Quick Spec Sheet
-1018 steel
-Black oxide finish
-1.6oz
-Clamp/compression fitting
-Compact 1.6"x1.08" (HxW)
-Attachment requires ONLY HAND TIGHTENING
-Gas port is drilled all the way through for ease of alignment with your gas port.
ALLEN KEYS NEEDED FOR THIS BLOCK:
Adjustment screw = 5/64"
Side locking screw = .05"
Attachment screws= 3/32"
