Bought a rail but need a good gas block? You'll dig this non-adjustable option then.
Weighing in at 1.6oz, this .936 gas
block attaches to your barrel by compression
which is attained by tightening the three screws on the bottom. It is
suggested that a REMOVABLE thread locker of your choice be used on the
screws. Roll pin is included with purchase!
-Black Nitride finish
-Configured as a non-adjustable gas block.
-Gas port witness hole for effortless gas port alignment.
-Gas tube removal hole for gas tube removal.
-Clamp attachment for fast and secure mounting.
Quick Spec Sheet
-for .936 barrel size
Allen Keys Needed For This Block:
Attachment screws= 3/32"