Bought a rail but need a good gas block? You'll dig this non-adjustable option then.
Weighing in at 1.6oz, this .875 gas block attaches to your barrel by compression which is attained by tightening the three screws on the bottom. It is suggested that a REMOVABLE thread locker of your choice be used on the screws. Roll pin is included with purchase!
Features
-Black Nitride finish-Configured as a non-adjustable gas block. -Gas port witness hole for effortless gas port alignment. -Gas tube removal hole for gas tube removal.-Clamp attachment for fast and secure mounting.
Quick Spec Sheet -1018 Steel
-1.6oz
-for .875 barrel size
Allen Keys Needed For This Block:
Adjustment screw = 5/64"
Side locking screw = .05"
Attachment screws= 3/32"
