The Co-witness Ready Optic Mount (CROM) is a direct mount for attaching
an Aimpoint Micro (H1, T1, H2, T2) to your Beretta 1301 Tactical
Shotgun. The CROM replaces the factory plastic rail and rear sight and
directly mounts the optic to the shotgun’s receiver. This allows the
optic to sit much lower, providing a consistent and proper cheek weld.
The CROM utilizes an XS rear ghost ring that is adjustable for both
windage and elevation and also gives you the ability to co-witness the rear
ghost ring and the factory front sight, allowing an emergency backup
sighting system in case of optic failure.
This particular model sports the preferred Ghost Ring setup of legendary shotgun instructor Rob Haught. The top half of the XS Sights aperture is milled off, resulting in an open U notch. The aperture is then deburred, sanded, and parkerized. This modified aperture allows for quicker sighting and a cleaner sight picture when using a red dot optic with the CROM.
Covers must
be removed to work with the H2/T2.
Note: The zero of a shotgun
is very dependent on the specific barrel and ammunition used. While the
XS rear sight allows for a wide range of adjustment, we cannot
necessarily guarantee a perfect co-witness.
However, all testing has
shown excellent usability with a variety of loads and guns.
This
is for the Beretta 1301 Tactical ONLY, and will not work with the 1301
Competition model as the hole spacing in the receiver is different.