Bought a rail but need a good gas block? Look no further! Weighing in at 1.5oz, this .750 gas block is fully adjustable via a screw in the front and lockable via a screw in the side. This block is attached to your barrel by compression which is attained by tightening the three screws on the bottom. It is suggested that a REMOVABLE thread locker of your choice be used on the screws. Each gas block comes with a roll pin as well.
Quick Spec Sheet
-for .750 barrel size
-Attachment requires ONLY HAND TIGHTENING
-Gas port is drilled all the way through for ease of alignment with your gas port.
ALLEN KEYS NEEDED FOR THIS BLOCK:
Adjustment screw = 5/64"
Side locking screw = .05"
Attachment screws= 3/32"