Such scary, much wow! This is for a set of three (3) different sets of rails.
Rail Set One: Glock 17/19/26
CNC machined, black oxide coated all steel rails for use with Glock slides for your 0% build.
These are steel inserts for those who wish to make frames from scratch and want stronger steel slide rails regardless of frame material. These are like the rails you get with a P80 kit, just not cast & stamped sheet metal.
Manufactured to a higher standard from billet steel, these wont crack, fatigue, or wear abnormally. 100% smooth drop in reliable function from the first round to the 5000th and beyond..
One size fits all G19 width slides: G26, G26L, G19, G17, G34, G17L, etc. (Will not fit G43 width slides)
This rail kit is NOT for the P80 frames.
These rails can be removed and transferred for use with new designs, different frame size, new features, improvements, etc.
What is included in this kit:
-Machined Glock rails
-5x buttonhead screws
-5x countersunk screws
-2x roll pins
-1x bullet tube of Vibratite
What you need to complete your build:
Complete Glock slide assembly of your choice.
The whole frame, that you build. This is like a 0% build. You can print, machine, cast, whittle, etc.
Lower parts kit:
(G19 and G26 based designs use a G26 locking block, and standard LPK from either. You can trim down the ears of a G19 locking block if that's what you have)
(G17 based designs use G17 LPK and locking block)
Rail Set Two: FMDA G26
What is included in this kit:
-Machined Glock 26 Rails
-3x M3x8mm screws
-2x solid dowel pins
-1x allen key for assembly
-1x bullet tube of Vibratite
Additional Features (technical mumbojumbo)
These rails are machined to FMDA (FreeMenDontAsk) specs for the Glock 26 (G26) frame. Will fit the FMDA G26
The dowel pins are 18-8 pins and may need to be trimmed to size.
The dowel pin hole is machined for a slip fit, so just a light tapping is needed to get the pin through.
What else you'll need:
Complete Glock 26 slide assembly of your choice.
The whole frame, that you build. This is like a 0% build. You can print, machine, cast, whittle, etc.
Lower parts kit. You will need a G26 locking block and a standard LPK
Please observe all local, state, federal and natural laws that apply to you.
Credit for the origins of this project goes to Ivanthetroll over at DetDisp. The credit for this revision is to FreeMenDontAsk
Rail Set Three: SD9
What is included in this kit:
-Machined Steel SD9 Rail
-2x solid dowel pins
Additional Features (technical mumbojumbo)
These rails are machined to FMDA (FreeMenDontAsk) specs for the Smith SD9.
The dowel pins are 18-8 pins and may need to be trimmed to size.
The dowel pin hole is machined for a slip fit, so just a light tapping is needed to get the pin through.
What else you'll need:
Complete SD9 slide assembly of your choice.
The whole frame, that you build. This is like a 0% build. You can print, machine, cast, whittle, etc.
Lower parts kit.
Please observe all local, state, federal and natural laws that apply to you.
Credit for the origins of this project goes to Ivanthetroll over at DetDisp. The credit for this revision is to FreeMenDontAsk
