If you're a chronic gas block assembler, you know that putting the gas tube pin into the hole is a moderate pain-in-the-ass, or PITA in acronymical parlance. One day not too long ago I was pissed off and I decided to just model up and 3D print my own tray to hold my gas blocks in place while I pin the gas tube into the block. VOILA! A new product is born!
Quick details here:
-For my .750 gas block but the barrel cut is for up to a .936
-Has a hole under the gas tube pin so assembly and disassembly of a gas block can be done.
ADDENDUM: By customer request and inborn frustration, my gas block trays now are fully-reversible and you can work on either side of the block.
Posted by Sev on 15th Aug 2018
This little tray was a life saver for assembling the Wojtek Weaponry gas blocks. It was a snug fit and made it fairly easy to punch the roll pin for the gas tube into the gas block. Buy one for future build as it is reusable.
My only negative is that I could flip the gas block over and punch the pin back out the opposite way or if the pin had to be adjusted since the block is only cut to allow for work with the right side up.
Posted by Joel on 17th Apr 2018
This makes installing way easier!