Bought a rail but need a good gas block? Like fiddling around with your gas hole? Look no further! Weighing in at 1.3oz, this .625 gas block is fully adjustable via a screw in the front and lockable via a screw in the side. This block is attached to your barrel by compression which is attained by tightening the three screws on the bottom. It is suggested that a REMOVABLE thread locker of your choice be used on the screws.
Each gas block comes with a roll pin so there is no need to hunt one down at your local store!
-for .625 gas journal size
-Attachment requires ONLY HAND TIGHTENING
ALLEN KEYS NEEDED FOR THIS BLOCK:
Adjustment screw = 5/64"
Side locking screw = .05"
Attachment screws= 3/32"
Showing reviews 1-10 of 16 | Next
Posted by Savi on 18th Aug 2018
This gas block is awesome! The finish is excellent and had a perfect, snug fit on the barrel. I prefer the clamp on style vs. set screw, and the gas block is easy to adjust. Definitely recommended!
Posted by Dan on 27th Jul 2018
I have built 20 uppers so far and the last 3 I have used Wojtek's. All I can say they work as advertised and will keep continue to use on future builds. If you looking for "cool" guys in man buns and parts with special unicorn sprinkles, look elsewhere! If you are looking for things that work, look no further. My background automotive and aerospace manufacturing.
Posted by Max Young on 5th Jul 2018
Impossible to find this combination of features elsewhere for twice as much. Nice design and machining and very light. Photo is a good representation of finish -- not as fancy as some, but a low-profile block hides underneath the handguard, so who cares? Lightning shipping and service from Wojtek as well.
Posted by Unknown on 9th Jun 2018
I got this gas block for a budget lightweight AR15 project. I wanted to have an adjustable gas block so I could run a lightweight BCG and after looking everywhere for something that was affordable I found the Wojtek one. At 35 bucks you really can't beat it. It's a very well made piece and even though it's not titanium it's still very lightweight, with the relief cuts on the sides. It's made with a no-frills approach: the finish is blue instead of nitride or others, and the adjustments is done by turning one screw and using a second smaller screw to secure it once you are done adjusting it. It might not be as corrosion resistant or as convenient to tweak as the more expensive ones with click adjustments, but it works perfectly fine and it costs less than half. When it comes to guns like an AR15 I much prefer to avoid spending money on bling and spend that money on ammo instead. As long as this gas block keeps serving me well, I will buy it again for my future AR builds.
Posted by Gary Gallagher on 18th May 2018
This .625 gas block was perfect. Great finish, good quality craftsmanship. Install was a breeze. I would highly recommend for anybody in need of a .625 gas block for thier build!
Posted by Chad Olsen on 24th Apr 2018
I wasn't sure about buying from a place unknown to me, but when I saw they were a small company behind enemy lines (California) I decided to go for it.
I was not disappointed. This gas block is top notch. Machining and finish looks flawless. Very easy to attach and adjust. It holds rock solid onto the barrel so if you are worried about it being a clamp, don't be. I put it on to test it out before finishing my upper build and I could not move it. It has 3 screws holding it in place, after taking out 2 of the screws i thought Id see if I could adjust it. Couldn't even move it when it had only 1 screw in it.
This would be an excellent gas block for the price even if it cost twice as much.
Posted by stuart lindsay on 12th Apr 2018
shipped quick and seems quality made. bought for use with suppressor and functions perfect. about five hundred rounds through so far
Posted by Unknown on 3rd Apr 2018
Fits very well, adjusts easily
Posted by Unknown on 4th Mar 2018
I despise set screw gas blocks. Clamps are infinitely more secure. I’ve used yankee hill clamp blocks but they are bulky and don’t work with a lot of slim rails. These would fit any slim rail I’ve ever seen and have very tight tolerances, smooth finish. Not sure about the adjustable part I’ll probably loctite it down full open as I’m running it on a rifle length faxon gunner barrel but for a carbine length it might be beeficial as they are way over gassed.
Posted by bob j on 23rd Feb 2018
blew away my expectations, better than some products out there 3x the price. i will be recommending wojtek to everyone
Showing reviews 1-10 of 16 | Next